About Kingsley

We, Kingsley, deal in logistic and materials handling equipment since 70's.

We devote to provide professional logistic equipments and services to improve the safety....

Products > High Speed Door > High Speed Door 320
High Speed Door 320

ADVANTAGES OF High Speed Door 320
- Modular system allows custom configurations
- Fast opening and closing speed saves energy costs
- Space saving construction for almost unlimited possibilities of installation
- Fast and simple installation
- Maintenance-friendly design resulting in minimal service costs

- Interior
- Exterior in low wind conditions and moderate temperature
- Hygienic environments
- Machine Protection
- Various manufacturing and materials handling applications

- Flexible modular design
- Custom configured to each application
- Motor cover available in plastic, powder coated steel or stainless steel
- Optional top roll cover available in galvanised steel, aluminium or stainless steel

- Available in various materials and colours
- Wind tabs enhance wind resistance

- Available from 1300 mm width
- Sensor stops door immediately upon impact
- Prevents damage to the bottom beam
- Easily manual reset

Hollow shaft gear motor with drop down safety gearbox. Available on right- or left-hand side.

Choice of one of the following four systems:
- ACS 25
- ACS 50
- ACS 60
- ACS 70
- ACS 80

The door can be operated manually with a crank in the event of a power failure.

This door is designed according to the regulations of the Workplace Directive of the UVV as well as the harmonized CE Guidelines including the EN 13241-1.

The security of the door is designed for normal use for vehicles in industrial environment corresponding to the harmonized CE-Guidelines. In consideration of the situation on site - especially in case of use by pedestrians - additional safety measures, like additional actuators may be required. Next to this, special environmental conditions may have impact on the right choice of doortype. In case of any doubt please contact our sales engineer for advice in your application.

Technical Data High Speed Door 320
Interior door suitable
Exterior door partially suitable
Wind resistance class 1 - EN 12424
Door dimension (mm)  
DW min. / max. 100 / 350 cm
DH min. / max. 100 / 350 cm
Opening direction vertical
Surface (alternatively)  
Side frame galvanised steel, stainless steel, aluminum
Bottom profile aluminium,stainless steel
Knock-out capability /DW > 130 cm
Top roll (alternatively) - aluminium, stainless steel
- aluminium + stainless steel
Covers (alternatively)  
Top roll cover 1) galvanised steel, stainless steel, aluminium
Motor cover 1) plastic, stainless steel, powder coated steel
Door curtain (alternatively)  
PVC with coloured reinforcement stripes
PVC with silicon free reinforement stripes
Wind taps
Drive unit electrical
Chain drive
Control systems ACS 25, 50, 60, 70, 80
Motor power / kW 0,37 / 0,75 / 1,1 kW
Electrical safety contact edge
Door line photocell
Fall down protection
(drive system)
Extended flexible seal
  ACS 25 ACS 50 ACS 60 ACS 70 ACS 80
Speed (m/s)          
open/close up to m/s 0,8/0,8 0,8/0,8 2,0/0,8 2,2/0,8 2,0/0,8
Fuse protection on site 10 A 6,3A 6,3 A 10 A 10 A
Control voltage 24 V DC
Protection IP 55 3) IP 55
3(N)PE220/230/380/400/ 415/440/500V 50/60 Hz
L/N/PE200/230/240V50/60 Hz        
optional with transformer 2L/PE 400/440/500 V 50/60 Hz        
Traffic light function  
without direction detection
with direction detection
Flashing alarm light
Error message

Option Standard — not available
1) For doors of height 250 cm the use of top roll and motor cover is required according to standard EN 13241-1.
2) not available for ACS 25
3) with CEE-plug IP 54
4) partial transformer necessary